 |
 |
|
| No. 5 with valves removed | Another shot of No. 5 | |
 |
 |
|
| No. 5 after cleaning with a wire wheel | No. 5 after cleaning with a wire wheel | |
 |
 |
|
| Top side of No. 5 | Valve before cleaning | |
 |
 |
|
| 1/2 cleaned valves | 1/2 cleaned valves | |
|
There is some carbon buildup on these. The heads are stamped .010 so I think were milled only once. No port work, i.e. almost virgin. I'm not a machine shop but these GTO heads will clean up very nice.
|
